 |
New Cold Air Intake
This system has the Largest Diameter, Shortest and Straightest Air Path on the Market making it the Lowest Restriction Cold Air Intake System available and features an easy- to- change air filter location including a Chrome Intake Tube, Cold Air Divider, silicon hose couplings and all hardware needed for ONLY $210! The intake tubes are available in either 3" or 3 ½". Cold Air Divider is bare so you can paint to match your SC if desired. |
$210.00 |
|
| |
|
|
|
 |
MPx Case Only, no intake plenum or rotors. Rear bearings included.
|
$625.00
Plus Shipping |
|
| |
|
|
|
|
MPx SC Case PLUS MP's Matching Intake Plenum
Powder Coated
|
$1125.00
Plus Shipping |
|
| |
|
|
|
|
Complete MPx Supercharger with GTP coated rotors assembled with rebuilt snout PLUS MP's Matching Intake Plenum
You supply a MP90 core
|
$1560.00
Plus Shipping |
|
| |
|
|
|
|
Same as above except Magnum Powers supplies the core. When MP receives your good core the $250 core charge will be reimbursed
MP supplied supercharger core.
|
$1810.00
Plus Shipping |
|
| |
|
|
|
| |
|
|
|
|
Supercharger and Jackshaft Pulley Kit. This 15% overdrive pulley set has 8 rib pulley to the crank and a 10 rib between the Jackshaft and Supercharger. With the 10% crank pulley below total overdrive is 25% includes Upper Belt. Recommended for All MPx and MPIII superchargers.
|
$343.00 |
|
| |
|
|
|
|
Lower Chin Spoiler/Air Dam
Reduces engine temperature when driving in summer heat. This Chin Spoiler is not just for Supercoupes with the FMIC, it makes any Supercoupe run significantly cooler. Fits 89-93 ONLY
|
$99.00
|
|
| |
|
|
|
|
Magnum Powers' Original Intake Plenum for 94/95 Supercharger. These Plenums are very rare, we have just a few in stock |
$499
|
|
| |
|
|
|
| |
94/95 "S" Port'ed Supercharger, coated rotors and rebuilt.
SOLD
|
Only One Available at this price $535 |
|
| |
|
|
|
 |
Front Mount Intercooler Kit
Magnum Powers' Frront Mount Intercooler Kit makes More Power and Looks Great! The Kit comes with everything you need for installation including Chrome IC Tubes, Silicon Couplings, 16" Fan and all Hardware. Note: For use with Stock Radiator. |
$1325.00 |
|
| |
|
|
|
 |
Front Mount Intercooler Kit
Same as above but this version is for those with Griffin Radiators. |
$1325.00 |
|
| |
|
|
|
| |
Pusher Fan Option
This 14" Pusher Fan works in tandem with the Puller Fan that comes with the stock radiator IC Kit version for even more cooling capabilities. |
$195.00 |
|
| |
|
|
|
 |
Polished Classic Top W/O Nut
This Polished Classic Top is provided without the Collar Nut and Looks Great with the Polished and Chrome Plated Intercooler Tubes! |
$325.00 |
|
| |
|
|
|
 |
85mm Throttle Body
Largest Thunderbird SC Throttle Body and guaranteed to idle perfect! |
$305.00 |
|
| |
|
|
|
| |
EGR Adapter
Adapts the Plenum to the EGR valve for SC's having an EGR Valve. |
$50.00 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
 |
Raised Classic Top
The Classic Top comes complete with the collar Nut so there is no need for a core trade-in. All you have to do is order the Classic Top, unbolt your old top and bolt on the New Classic Top in its place. This is the Powder Coated Version. |
$275.00 |
|
| |
|
|
|
 |
Polished Raised Classic Top
Same as above but in Polished Aluminum. |
$385.00 |
|
| |
|
|
|
 |
Are your Supercharger belts slipping?
Then you need MP's new high tension springs that replace the whimpyones in your stock tensioners. The springs are easy to replace and will make a big difference in performance. These springs are only $49.99 for a set of two making them the best bang for the buck ever. Click here for Installation Instructions.
BACK IN STOCK!
|
$49.99 |
|
| |
|
|
|
 |
Crank Pulley
10% overdrive Crank Pulley, increases blower overdrive by an additional 10% without belt slip. Available in Anodize aluminum. |
$225.00 |
|
| |
|
|
|
